description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PP HG K190 | ||||
| FEATURES | APPLICATIONS | |||
| High gloss • Good mechanical performance balance • High temperature resistance | Home Appliance Components • Home Furnishings | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ASTM D792 | 23℃ | 0.97 | |
| Melt Flow Rate | ASTM D1238 | 260℃,2.16KG | g/10min | 30 |
| Mold Shrinkage | ASTM D955 | 23℃ | % | 1.3~1.6 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ASTM D638 | 50mm/min | Mpa | 35 |
| Elongation at Break | ASTM D638 | 50mm/min | % | 15 |
| Flexural Strength | ASTM D790 | 2.0mm/min | Mpa | 52 |
| Flexural Modulus | ASTM D790 | 2.0mm/min | Mpa | 1900 |
| Impact Strength, Notched | ASTM D256 | 23°C 3.2mm | J/m | 30 |
| Electrical Performance | ||||
| Volume resistance | ASTM D257 | 1E16 | Ω.cm | |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ASTM D648 | 0.45MPa | ℃ | 130 |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 3.3mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 3.3mm | UL94 | HB | ||
| HAI Full Color 1.5mm | UL 746A | 0 | PLC | |
| HAI Full Color 1.5mm | UL 746A | 0 | PLC | |
| RTI Elec Full Color 1.5mm | UL 746B | 65 | °C | |
| RTI Elec Full Color 3.3mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 1.5mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 3.3mm | UL 746B | 65 | °C | |
| RTI Str Full Color 1.5mm | UL 746B | 65 | °C | |
| RTI Str Full Color 3.3mm | UL 746B | 65 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 90 | ||
| Drying Time | h | 2 | ||
| Front Temperature | ℃ | 180～210 | ||
| Middle Temperature | ℃ | 190～230 | ||
| Temperature of The Third Section | ℃ | 200～240 | ||
| Melting temperature | ℃ | 190~245 | ||
| Maximum melting temperature | ℃ | 260 | ||
| Mold Temperature | ℃ | 30～60 | ||
| Injection speed | Medium and low speed | |||
Related Products
