description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
Parameter：
| Material Technical Datasheet | ||||
| PP FR K05 | ||||
| FEATURES | APPLICATIONS | |||
| High rigidity | Electronic and electrical applications | |||
| Home Furnishings | ||||
| Injection Molding Applications | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.31 |
| Shrinkage Rate | ISO 2577 | % | 1.0~1.3 | |
| Melt index | ISO 1133 | 220°C 2.16kg | % | 5 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ASTM D785 | 85 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 50mm/min | Mpa | 28 |
| Elongation at Break | ISO 527 | 50mm/min | % | 30 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 42 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2700 |
| Cantilever notch impact | ISO 180 | 23°C 4.0mm | J/m2 | 4.5 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 1.8MPa 4.0mm | ℃ | 120 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| CTI 3.0mm solution A | IEC 60112 | 600 | V | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full color 0.8mm | UL94 | V-0 | ||
| Fire Rating Full color 1.5mm | UL94 | V-0 | ||
| Fire Rating Full color 2.0mm | UL94 | V-0 5VA | ||
| Fire Rating Full color 3.2mm | UL94 | V-0 5VA | ||
| Glowing wire relative temperature | IEC 60695 | 960℃ | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full color 0.8mm | UL94 | V-0 | ||
| Fire Rating Full color 1.5mm | UL94 | V-0 | ||
| Fire Rating Full color 2.0mm | UL94 | V-0 5VA | ||
| Fire Rating Full color 3.0mm | UL94 | V-0 5VA | ||
| HWI Full color 0.8mm | UL 746A | 4 | PLC | |
| HWI Full color 1.5mm | UL 746A | 2 | PLC | |
| HWI Full color 2.0mm | UL 746A | 2 | PLC | |
| HWI Full color 3.0mm | UL 746A | 2 | PLC | |
| HAI Full color 0.8mm | UL 746A | 0 | PLC | |
| HAI Full color 1.5mm | UL 746A | 0 | PLC | |
| HAI Full color 2.0mm | UL 746A | 0 | PLC | |
| HAI Full color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full color 0.8mm | UL 746B | 125 | °C | |
| RTI Elec Full color 1.5mm | UL 746B | 125 | °C | |
| RTI Elec Full color 2.0mm | UL 746B | 125 | °C | |
| RTI Elec Full color 3.0mm | UL 746B | 125 | °C | |
| RTI Imp Full color 0.8mm | UL 746B | 120 | °C | |
| RTI Imp Full color 1.5mm | UL 746B | 120 | °C | |
| RTI Imp Full color 2.0mm | UL 746B | 120 | °C | |
| RTI Imp Full color 3.0mm | UL 746B | 120 | °C | |
| RTI Str Full color 0.8mm | UL 746B | 120 | °C | |
| RTI Str Full color 1.5mm | UL 746B | 120 | °C | |
| RTI Str Full color 2.0mm | UL 746B | 120 | °C | |
| RTI Str Full color 3.0mm | UL 746B | 120 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Insulation strength | ASTM D149 | 34 | KV/mm | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 90～100 | ||
| Drying Time | h | 2 | ||
| Front Temperature | ℃ | 180～200 | ||
| Middle Temperature | ℃ | 190～210 | ||
| Temperature of The Third Section | ℃ | 190～210 | ||
| Melting temperature | ℃ | 200~230 | ||
| Maximum melting temperature | ℃ | 250 | ||
| Mold Temperature | ℃ | 30～60 | ||
| Injection speed | Medium speed | |||
Related Products
