Home  >  Products  >  PP Compound  >  PP FRG4 K0NP

Products

description1
Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout
Information
Material Technical Datasheet
PP FRG4 K0NP
FEATURES APPLICATIONS
Non-blooming Electronic and electrical applications
Good mechanical performance Home appliance components
Chemical coupling Structural components
Properties Test Standard Test Condition Units Typical Values
Physical Properties
Specific Gravity ISO 1183 23℃ g/cm³ 1.25
Shrinkage Rate ISO 2577 23℃ % 0.4
Ash content ISO 3451   % 20
Hardness
Mechanical Properties Test Standard Test Condition Units Data
Rockwell hardness R scale ISO 2039     110
Mechanical Properties
Mechanical Properties Test Standard Test Condition Units Data
Tensile Strength ISO 527 10mm/min Mpa 60
Elongation at Break ISO 527 10mm/min % 4
Flexural Strength ISO 178 2.0mm/min Mpa 80
Flexural Modulus ISO 178 2.0mm/min Mpa 4500
Cantilever notch impact ISO 180 23 ° C A-notch KJ/m2 9
Thermal Properties
Thermal Properties Test Standard Test Condition Units Data
H.D.T ISO 75 0.45MPa 145
H.D.T ISO 75 1.8MPa 135
Electrical Performance
Bulk resistance IEC 60093 1E12 Ω
Flame Retardancy
Flame Retardancy Test Standard Data
Fire Rating Full Color 1.5mm UL94 V-0
Fire Rating Full Color 3.0mm UL94 V-0
UL
Flame Retardancy Test Standard Data Units
Fire Rating Full Color 1.5mm UL94 V-0  
Fire Rating Full Color 3.0mm UL94 V-0  
HWI Full color 1.5mm UL 746A 1 PLC
HWI Full color 3.0mm UL 746A 0 PLC
HAI Full color 1.5mm UL 746A 0 PLC
HAI Full color 3.0mm UL 746A 0 PLC
RTI Elec Full l Color 1.5mm UL 746B 65 °C
RTI Elec Full  Color 3.0mm UL 746B 65 °C
RTI Imp Full  Color 1.5mm UL 746B 65 °C
RTI Imp Full  Color 3.0mm UL 746B 65 °C
RTI Str Full  Color 1.5mm UL 746B 65 °C
RTI Str Full  Color 3.0mm UL 746B 65 °C
CTI IEC 60112 0 PLC
Insulation strength ASTM D149 23 KV/mm
HVTR UL 746A 1 PLC
GWFI 1.5mm IEC 60695-2-12 960 °C
GWFI 3.0mm IEC 60695-2-12 960 °C
GWIT 1.5mm IEC 60695-2-13 750 °C
GWIT 3.0mm IEC 60695-2-13 750 °C
Injection Molding
Injection Molding Units Data
Drying Temperature 80~90
Drying Time h 2~4
Front Temperature 180~200
Middle Temperature 170~190
Temperature of The Third Section 170~190
Melting temperature 170~200
Maximum melting temperature 210
Mold Temperature 30~60
Injection speed Medium and high speed

CONTACT US