description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
Parameter：
| Material Technical Datasheet | ||||
| PP FRG2 K0NP | ||||
| FEATURES | APPLICATIONS | |||
| Electronic and electrical applications | ||||
| Good mechanical performance | Home appliance components | |||
| Structural components | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.1 |
| Shrinkage Rate | ISO 2577 | 23℃ | % | 0.5~0.8 |
| Melt index | ISO 1133 | 230°C 2.16kg | g/10min | 10 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 50 |
| Elongation at Break | ISO 527 | 10mm/min | % | 3 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 70 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 3200 |
| Cantilever notch impact | ISO 180 | 23°C | J/m2 | 7 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 0.45MPa | ℃ | 140 |
| H.D.T | ISO 75 | 1.8MPa | ℃ | 130 |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| Fire Rating Black Color 3.0mm | UL94 | V-0 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| Fire Rating Black Color 3.0mm | UL94 | V-0 | ||
| RTI Elec Natural Color 1.5mm | UL 746B | 65 | °C | |
| RTI Elec Black Color 3.0mm | UL 746B | 65 | °C | |
| RTI Imp Natural Color 1.5mm | UL 746B | 65 | °C | |
| RTI Imp Black Color 3.0mm | UL 746B | 65 | °C | |
| RTI Str Natural Color 1.5mm | UL 746B | 65 | °C | |
| RTI Str Black Color 3.0mm | UL 746B | 65 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Insulation strength | ASTM D149 | 38 | KV/mm | |
| HVTR | UL 746A | 1 | PLC | |
| GWFI 1.5mm | IEC 60695-2-12 | 960 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| GWIT 1.5mm | IEC 60695-2-13 | 775 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 825 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80 | ||
| Drying Time | h | 2 | ||
| Front Temperature | ℃ | 180～195 | ||
| Middle Temperature | ℃ | 185～200 | ||
| Temperature of The Third Section | ℃ | 190～200 | ||
| Melting temperature | ℃ | 200~220 | ||
| Maximum melting temperature | ℃ | 200 | ||
| Mold Temperature | ℃ | 30～60 | ||
| Injection speed | Medium speed | |||
Related Products
