description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PP G8 K01 | ||||
| FEATURES | APPLICATIONS | |||
| Good appearance | Electronic and electrical applications | |||
| Good mechanical performance | Home appliance components | |||
| Chemical coupling | Structural components | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.25 |
| Shrinkage Rate | ISO 2577 | 23℃ | % | 0.2 |
| Ash content | ISO 3451 | % | 40 | |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 110 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 100 |
| Elongation at Break | ISO 527 | 10mm/min | % | 3 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 150 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 6500 |
| Cantilever notch impact | ISO 180 | 23 ° C A-notch | KJ/m2 | 15 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 0.45MPa | ℃ | 157 |
| H.D.T | ISO 75 | 1.8MPa | ℃ | 148 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Bulk resistance | IEC 60093 | 1E16 | Ω | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.6mm | UL94 | V-0 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| RTI Elec Full color 1.6mm | UL 746B | 65 | °C | |
| RTI Elec Full color3.0mm | UL 746B | 65 | °C | |
| RTI Imp NFull color 1.6mm | UL 746B | 65 | °C | |
| RTI Imp Full color 3.0mm | UL 746B | 65 | °C | |
| RTI Str Full color 1.6mm | UL 746B | 65 | °C | |
| RTI Str Full color 3.0mm | UL 746B | 65 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80~90 | ||
| Drying Time | h | 2~4 | ||
| Front Temperature | ℃ | 180～200 | ||
| Middle Temperature | ℃ | 200～230 | ||
| Temperature of The Third Section | ℃ | 220～240 | ||
| Melting temperature | ℃ | 2200~245 | ||
| Maximum melting temperature | ℃ | 260 | ||
| Mold Temperature | ℃ | 30～60 | ||
| Injection speed | Medium and high speed | |||
Related Products
