Home  >  Products  >  PP Compound  >  PP FRG6 K02

Products

description1
Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout
Information
Material Technical Datasheet
PP FRG6 K02
FEATURES APPLICATIONS
Non-blooming Electronic and electrical applications
Good mechanical performance Home appliance components
Chemical coupling Structural components
Properties Test Standard Test Condition Units Typical Values
Physical Properties
Specific Gravity ISO 1183 23℃ g/cm³ 1.41
Shrinkage Rate ISO 2577 23℃ % 0.3
Ash content ISO 3451   % 30
Hardness
Mechanical Properties Test Standard Test Condition Units Data
Rockwell hardness R scale ISO 2039     114
Mechanical Properties
Mechanical Properties Test Standard Test Condition Units Data
Tensile Strength ISO 527 10mm/min Mpa 85
Elongation at Break ISO 527 10mm/min % 3
Flexural Strength ISO 178 2.0mm/min Mpa 120
Flexural Modulus ISO 178 2.0mm/min Mpa 6800
Cantilever notch impact ISO 180 23 ° C A-notch KJ/m2 12.5
Thermal Properties
Thermal Properties Test Standard Test Condition Units Data
H.D.T ISO 75 0.45MPa 158
H.D.T ISO 75 1.8MPa 148
Electrical Performance
Electrical Performance Test Standard Data Units
Bulk resistance IEC 60093 1E16 Ω
Flame Retardancy
Flame Retardancy Test Standard Data
Fire Rating Full Color 1.5mm UL94 V-0
Fire Rating Full Color 3.0mm UL94 V-0
UL
Flame Retardancy Test Standard Data Units
Fire Rating Natural/black Color 0.8mm UL94 V-0  
Fire Rating Natural/black Color 3.2mm UL94 V-0  
RTI Elec Natural/black Color 0.8mm UL 746B 65 °C
RTI Elec Natural/black Color 3.2mm UL 746B 65 °C
RTI Imp Natural/black  Color 0.8mm UL 746B 65 °C
RTI Imp Natural/black  Color 3.2mm UL 746B 65 °C
RTI Str Natural/black  Color 0.8mm UL 746B 65 °C
RTI Str Natural/black  Color 3.2mm UL 746B 65 °C
Injection Molding
Injection Molding Units Data
Drying Temperature 80~90
Drying Time h 2~4
Front Temperature 180~200
Middle Temperature 200~230
Temperature of The Third Section 220~240
Melting temperature 220~240
Maximum melting temperature 260
Mold Temperature 30~60
Injection speed Medium and high speed

CONTACT US