description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| ABS UV K01 | ||||
| Material Properties | ||||
| UV resistance level | ||||
| FEATURES | APPLICATIONS | |||
| High gloss | Electronic product cabinet | |||
| High impact | Injection molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23°C | g/cm³ | 1.04 |
| Shrinkage Rate | ISO 294 | 23°C | % | 0.4～0.7 |
| Melt index | ISO 1133 | 220°C 10kg | g/10min | 25 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 110 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 50mm/min | Mpa | 45 |
| Elongation at Break | ISO 527 | 50mm/min | % | 15 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 68 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2300 |
| Cantilever beam notch impact | ISO 180 | 23 ° C | KJ/m2 | 20 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 1.8MPa 4.0mm | ℃ | 83 |
| Vicat softening temperature | ISO 306 | 120°C/hr 10N | ℃ | 95 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E14 | Ω | |
| Insulation Strength 2.0mm | IEC 60243 | 23 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.2mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.2mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| HWI Full Color 1.6mm | UL 746A | 3 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 2 | PLC | |
| HAI Full Color 1.6mm | UL 746A | 0 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full Color 1.6mm | UL 746B | 60 | °C | |
| RTI Elec Full Color 3.0mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 1.6mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 60 | °C | |
| RTI Str Full Color 1.6mm | UL 746B | 60 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 60 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80～90 | ||
| Drying Time | h | 2～4 | ||
| Front Temperature | ℃ | 180～205 | ||
| Middle Temperature | ℃ | 205～230 | ||
| Temperature of The Third Section | ℃ | 215～240 | ||
| Melting temperature | ℃ | 210~240 | ||
| Maximum melting temperature | ℃ | 250 | ||
| Mold Temperature | ℃ | 30～80 | ||
| Injection speed | Medium and low speed | |||
Related Products
