description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| ABS FRHF K01 | ||||
| Material Properties | ||||
| Flame retardant | ||||
| FEATURES | APPLICATIONS | |||
| High liquidity Dimensional stability Good mechanical performance High rigidity |
Electronic product cabinet CD/DVD internal holder Internal structure of OA equipment Imaging device housing Computer plug Precision molding applications |
|||
| Dimensional stability | IT equipment | |||
| Good mechanical performance | household products | |||
| Injection molding applications | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23°C | g/cm³ | 1.185 |
| Shrinkage Rate | ISO 294 | 23°C | % | 0.4～0.6 |
| Melt index | ISO 1133 | 200°C 5kg | g/10min | 4 |
| Melt index | ISO 1133 | 220°C 10kg | g/10min | 45 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 101 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 50mm/min | Mpa | 40 |
| Elongation at Break | ISO 527 | 50mm/min | % | 8 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 62 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2100 |
| Cantilever beam notch impact | ISO 180 | 23 ° C 4.0mm A-notch | KJ/m2 | 18 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 0.45MPa 4.0mm | ℃ | 83 |
| Thermal deformation temperature | ISO 75 | 1.8MPa 4.0mm | ℃ | 74 |
| Vicat softening temperature | ISO 306 | 120°C/hr 10N | ℃ | 93 |
| Vicat softening temperature | ISO 306 | 50°C/hr 50N | ℃ | 84 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E14 | Ω | |
| Insulation Strength 2.0mm | IEC 60243 | 22 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.6mm | UL94 | V-0 | ||
| Fire Rating Full Color 2.0mm | UL94 | V-0 5VB | ||
| Fire Rating Full Color 2.5mm | UL94 | V-0 5VA | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 5VA | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.6mm | UL94 | V-0 | ||
| Fire Rating Full Color 2.0mm | UL94 | V-0 5VB | ||
| Fire Rating Full Color 2.5mm | UL94 | V-0 5VA | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 5VA | ||
| HWI Full Color 1.6mm | UL 746A | 3 | PLC | |
| HWI Full Color 2.0mm | UL 746A | 3 | PLC | |
| HWI Full Color 2.5mm | UL 746A | 3 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 3 | PLC | |
| HAI Full Color 1.5mm | UL 746A | 0 | PLC | |
| HAI Full Color 2.0mm | UL 746A | 0 | PLC | |
| HAI Full Color 2.5mm | UL 746A | 0 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full Color 1.5mm | UL 746B | 60 | °C | |
| RTI Elec Full Color 2.0mm | UL 746B | 60 | °C | |
| RTI Elec Full Color 2.5mm | UL 746B | 60 | °C | |
| RTI Elec Full Color 3.0mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 1.5mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 2.0mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 2.5mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 60 | °C | |
| RTI Str Full Color 1.5mm | UL 746B | 60 | °C | |
| RTI Str Full Color 2.0mm | UL 746B | 60 | °C | |
| RTI Str Full Color 2.5mm | UL 746B | 60 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 60 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 70～80 | ||
| Drying Time | h | 2～4 | ||
| Front Temperature | ℃ | 155～175 | ||
| Middle Temperature | ℃ | 165～185 | ||
| Temperature of The Third Section | ℃ | 175～205 | ||
| Melting temperature | ℃ | 165~205 | ||
| Maximum melting temperature | ℃ | 225 | ||
| Mold Temperature | ℃ | 30～60 | ||
| Injection speed | Medium and low speed | |||
Related Products
