ABS FRHF K0EX
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| ABS FRHF K0EX | ||||
| Material Properties | ||||
| Flame retardant | ||||
| FEATURES | APPLICATIONS | |||
| Pipe | ||||
| High rigidity | Profile | |||
| Extrusion molding applications | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.21 |
| Shrinkage rate | ISO 294 | 23℃ | % | 0.4～0.7 |
| Melt index | ISO 1133 | 200°C 5kg | g/10min | 2.5 |
| Melt index | ISO 1133 | 220°C 10kg | g/10min | 20 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 104 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ASTM D638 | 50mm/min | Mpa | 38 |
| Elongation at Break | ASTM D638 | 50mm/min | % | 10 |
| Flexural Strength | ASTM D790 | 2.0mm/min | Mpa | 60 |
| Flexural Modulus | ASTM D790 | 2.0mm/min | Mpa | 2300 |
| Impact Strength, Notched | ASTM D256 | 23 ° C 4.0mm A-notch | kJ/m2 | 15 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 0.45MPa 4.0mm | ℃ | 83 |
| Thermal deformation temperature | ISO 75 | 1.8MPa 4.0mm | ℃ | 74 |
| Vicat softening temperature | ISO 306 | 120°C/hr 10N | ℃ | 93 |
| Vicat softening temperature | ISO 306 | 50°C/hr 50N | ℃ | 84 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | ASTM D257 | 1E14 | Ω.com | |
| Insulation Strength 1.6mm | ASTM D149 | 22 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating | UL94 | V-0 | ||
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 70～80 | ||
| Drying Time | h | 3～5 | ||
| Front Temperature | ℃ | 150～170 | ||
| Middle Temperature | ℃ | 160～180 | ||
| Temperature of The Third Section | ℃ | 170～190 | ||
| Melting temperature | ℃ | 160～185 | ||
| Maximum melting temperature | ℃ | 200 | ||
Related Products
