description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
Parameter
| Material Technical Datasheet | ||||
| ABS G2 K01 | ||||
| FEATURES | APPLICATIONS | |||
| Good surface | Electronic and electrical applications | |||
| Dimensional stability | CD/DVD internal holder | |||
| Good mechanical performance | Internal structure of OA equipment | |||
| High rigidity | Imaging device housing | |||
| Low warpage | Computer plug | |||
| High temperature resistance | Precision molding applications | |||
| Dimensional stability | CD/DVD internal holder | |||
| Good mechanical performance | nternal structure of OA equipment | |||
| High rigidity | Imaging device housing | |||
| Low warpage | Computer plug | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.2 |
| Shrinkage Rate | ISO 2577 | % | 0.2~0.4 | |
| Melt index | ISO 1133 | 220°C 10kg | g/10min | 15 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 62 |
| Elongation at Break | ISO 527 | 10mm/min | % | 3 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 100 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 3800 |
| Cantilever notch impact | ISO 180 | 23°C 4.0mm | J/m2 | 9 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 1.8MPa 4.0mm | ℃ | 90 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Bulk resistance | IEC 60093 | 1.00E+16 | Ω | |
| Insulation Strength 1.6mm | IEC 60243 | 23 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1mm | UL94 | HB | ||
| Fire Rating Full Color 1.5~1.65mm | UL94 | HB | ||
| RTI Elec Full Color 1mm | UL 746B | 60 | °C | |
| RTI Elec Full Color 1.5~1.65mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 1mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 1.5~1.65mm | UL 746B | 60 | °C | |
| RTI Str Full Color 1mm | UL 746B | 60 | °C | |
| RTI Str Full Color 1.5~1.65mm | UL 746B | 60 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80～90 | ||
| Drying Time | h | 2～4 | ||
| Front Temperature | ℃ | 190～215 | ||
| Middle Temperature | ℃ | 210～250 | ||
| Temperature of The Third Section | ℃ | 220～260 | ||
| Melting temperature | ℃ | 210~250 | ||
| Maximum melting temperature | ℃ | 320 | ||
| Mold Temperature | ℃ | 40～90 | ||
| Injection speed | Medium and low speed | |||
Related Products
