Home  >  Products  >  PC Compound  >  PC FRG7 K0

Products

description1
Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout
Information
Material Technical Datasheet
PC FRG7 K0
FEATURES APPLICATIONS
Good surface Electronic and electrical applications
Dimensional stability CD/DVD internal holder
Good mechanical performance Internal structure of OA equipment
High rigidity Imaging device housing
Low warpage Computer plug
High temperature resistance Precision molding applications
Properties Test Standard Test Condition Units Typical Values
Physical Properties
Specific Gravity ISO 1183 23℃ g/cm³ 1.46
Shrinkage Rate ISO 2577   % 0.1~0.3
Ash Content ISO 3451 825°C 40min % 35
Mechanical Properties
Mechanical Properties Test Standard Test Condition Units Data
Tensile Strength ISO 527 10mm/min Mpa 120
Elongation at Break ISO 527 10mm/min % 5
Flexural Strength ISO 178 2.0mm/min Mpa 190
Flexural Modulus ISO 178 2.0mm/min Mpa 9500
Cantilever notch impact ISO 180 23°C 4.0mm J/m2 12
Cantilever beam impact without notch ISO 180 23°C 4.0mm J/m2 50
Thermal Properties
Thermal Properties Test Standard Test Condition Units Data
H.D.T ISO 75 1.8MPa 4.0mm 144
Electrical Performance
Electrical Performance Test Standard Data Units
Volume resistance IEC 60093 1E15 Ω
Insulation Strength 1.6mm IEC 60243 26 KV/mm
Flame Retardancy
Flame Retardancy Test Standard Data
Fire Rating Full Color 1.5mm UL94 V-2
Fire Rating Full Color 3.0mm UL94 V-2
UL
Flame Retardancy Test Standard Data Units
Fire Rating Full Color 1.5mm UL94 V-0  
Fire Rating Full Color 3.0mm UL94 V-0  
HWI Full Color 1.5mm UL 746A 0 PLC
HWI Full Color 3.0mm UL 746A 0 PLC
HAI Full Color 1.5mm UL 746A 4 PLC
HAI Full Color 3.0mm UL 746A 4 PLC
RTI Elec 1.5mm UL 746B 80 °C
RTI Elec 3.0mm UL 746B 80 °C
RTI Imp 1.5mm UL 746B 80 °C
RTI Imp 3.0mm UL 746B 80 °C
RTI Str 1.5mm UL 746B 80 °C
RTI Str 3.0mm UL 746B 80 °C
Injection Molding
Injection Molding Units Data
Drying Temperature 110~120
Drying Time h 4~6
Front Temperature 230260
Middle Temperature 240290
Temperature of The Third Section 250320
Melting temperature 230~320
Maximum melting temperature 330
Mold Temperature 80~120
Injection speed Medium and low speed

CONTACT US