description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
Parameter
| Material Technical Datasheet | ||||
| PC FR84 K0 | ||||
| FEATURES | APPLICATIONS | |||
| High liquidity | Electronic and electrical applications | |||
| Good mechanical performance | Electric tool | |||
| Good processability | Injection molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ASTM D792 | 23℃ | 1.21 | |
| Melt Flow Rate | ASTM D1238 | 260℃,2.16KG | g/10min | 12 |
| Mold Shrinkage | ASTM D955 | 23℃ | % | 0.5~0.7 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ASTM D638 | 50 mm/min, 23℃ | Mpa | 62 |
| Elongation at Break | ASTM D638 | 50 mm/min, 23℃ | % | 60 |
| Flexural Strength | ASTM D790 | 2 mm/min, 23℃ | Mpa | 90 |
| Flexural Modulus | ASTM D790 | 2 mm/min, 23℃ | Mpa | 2300 |
| Impact Strength, Notched | ASTM D256 | 23°C 3.2mm | J/m2 | 600 |
| Optical Performance | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Reflectivity | Internal testing methods | % | 95 | |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ASTM D648 | 0.45MPa 6.4mm | ℃ | 131 |
| H.D.T | ASTM D648 | 1.8MPa 6.4mm | ℃ | 120 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Surface Resistance | ASTM D257 | 1E15 | Ω.com | |
| Insulation Strength 1.6mm | ASTM D149 | 28 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating natural Color 0.75mm | UL94 | V-0 | ||
| Fire Rating natural Color 3.0mm | UL94 | V-0 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating natural color 0.75mm | UL94 | V-0 | ||
| Fire Rating natural color 3.0mm | UL94 | V-0 | ||
| HWI natural color 0.75mm | UL 746A | 2 | PLC | |
| HWI natural color 3.0mm | UL 746A | 2 | PLC | |
| HAI natural color 0.75mm | UL 746A | 4 | PLC | |
| HAI natural color 3.0mm | UL 746A | 4 | PLC | |
| RTI Elec natural color 0.75mm | UL 746B | 80 | °C | |
| RTI Elec natural color 3.0mm | UL 746B | 80 | °C | |
| RTI Imp natural color 0.75mm | UL 746B | 80 | °C | |
| RTI Imp natural color 3.0mm | UL 746B | 80 | °C | |
| RTI Str natural color 0.75mm | UL 746B | 80 | °C | |
| RTI Str natural color 3.0mm | UL 746B | 85 | °C | |
| CTI | IEC 60112 | 3 | PLC | |
| GWFI 0.75mm | IEC 60695-2-12 | 960 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| GWIT 0.75mm | IEC 60695-2-13 | 900 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 850 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 120 | ||
| Drying Time | h | 4～6 | ||
| Front Temperature | ℃ | 240～260 | ||
| Middle Temperature | ℃ | 250～270 | ||
| Temperature of The Third Section | ℃ | 260～280 | ||
| Melting temperature | ℃ | 240～280 | ||
| Maximum melting temperature | ℃ | 300 | ||
| Mold Temperature | ℃ | 60～120 | ||
| Injection speed | Low High Speed | |||
Related Products
