description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
Parameter
| Material Technical Datasheet | ||||
| PC FRG3 K0 | ||||
| FEATURES | APPLICATIONS | |||
| Good surface Dimensional stability Good mechanical performance High rigidity Low warpage High temperature resistance |
Electronic and electrical applications CD/DVD internal holder Internal structure of OA equipment Imaging device housing Computer plug Precision molding applications |
|||
| Dimensional stability | CD/DVD internal holder | |||
| Good mechanical performance | nternal structure of OA equipment | |||
| High rigidity | Imaging device housing | |||
| Low warpage | Computer plug | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.29 |
| Shrinkage Rate | ISO 2577 | % | 0.3~0.5 | |
| Ash Content | ISO 3451 | 825°C 40min | % | 15 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 85 |
| Elongation at Break | ISO 527 | 10mm/min | % | 5 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 150 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 4800 |
| Cantilever notch impact | ISO 180 | 23°C 4.0mm | J/m2 | 8 |
| Cantilever beam impact without notch | ISO 180 | 23°C 4.0mm | J/m2 | 55 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 1.8MPa 4.0mm | ℃ | 138 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Bulk resistance | IEC 60093 | 1E16 | Ω | |
| Insulation Strength 1.6mm | IEC 60243 | 28 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.6mm | UL94 | V-0 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating 1.5mm | UL94 | V-0 | ||
| Fire Rating 3.0mm | UL94 | V-0 | ||
| HWI Full Color 1.5mm | UL 746A | 0 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 0 | PLC | |
| HAI Full Color 1.5mm | UL 746A | 4 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 4 | PLC | |
| RTI Elec 1.5mm | UL 746B | 80 | °C | |
| RTI Elec 3.0mm | UL 746B | 80 | °C | |
| RTI Imp 1.5mm | UL 746B | 80 | °C | |
| RTI Imp 3.0mm | UL 746B | 80 | °C | |
| RTI Str 1.5mm | UL 746B | 80 | °C | |
| RTI Str 3.0mm | UL 746B | 80 | °C | |
| CTI | IEC 60112 | 5 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 110～120 | ||
| Drying Time | h | 4～6 | ||
| Front Temperature | ℃ | 230～280 | ||
| Middle Temperature | ℃ | 240～310 | ||
| Temperature of The Third Section | ℃ | 250～320 | ||
| Melting temperature | ℃ | 230~320 | ||
| Maximum melting temperature | ℃ | 330 | ||
| Mold Temperature | ℃ | 80～120 | ||
| Injection speed | Medium and low speed | |||
Related Products
