PC FR82 K2NC
High heat resistance level
Material Technical Datasheet | ||||
PC FR82 K2NC | ||||
Material Properties | High heat resistance level | |||
FEATURES | APPLICATIONS | |||
High impact | Lampshade | |||
High rigidity | Housewear & Furnishings | |||
High temperature resistance | Cupboard | |||
Light diffusion level | Injection molding applications | |||
Properties | Test Standard | Test Condition | Units | Typical Values |
Physical Properties | ||||
Specific Gravity | ASTM D792 | 23℃ | 1.19 | |
Melt Flow Rate | ASTM D1238 | 300℃,1.2KG | g/10min | 18 |
Mold Shrinkage | ASTM D955 | 23℃ | % | 0.5~0.7 |
Hardness | ||||
Mechanical Properties | Test Standard | Test Condition | Units | Data |
Rockwell hardness R scale | ASTM D785 | 118 | ||
Mechanical Properties | ||||
Mechanical Properties | Test Standard | Test Condition | Units | Data |
Tensile Strength | ASTM D638 | 50mm/min | Mpa | 62 |
Elongation at Break | ASTM D638 | 50mm/min | % | 100 |
Flexural Strength | ASTM D790 | 2.0mm/min | Mpa | 95 |
Flexural Modulus | ASTM D790 | 2.0mm/min | Mpa | 2200 |
Impact Strength, Notched | ASTM D256 | 23°C 3.2mm | J/m | 680 |
Electrical Performance | ||||
Electrical Performance | Test Standard | Data | Units | |
Volume resistance | ASTM D257 | 1E16 | Ω.cm | |
Surface Resistance | ASTM D257 | 1E15 | Ω.com | |
Insulation Strength 1.6mm | ASTM D149 | 28 | KV/mm | |
Thermal Properties | ||||
Thermal Properties | Test Standard | Test Condition | Units | Data |
Thermal deformation temperature | ASTM D648 | 0.45MPa | ℃ | 136 |
Thermal deformation temperature | ASTM D648 | 1.8MPa | ℃ | 125 |
Flame Retardancy | ||||
Flame Retardancy | Test Standard | Data | ||
Fire Rating Full Color 1.6mm | UL94 | V-2 | ||
Fire Rating Full Color 3.2mm | UL94 | V-2 | ||
Injection Molding | ||||
Injection Molding | Units | Data | ||
Drying Temperature | ℃ | 120 | ||
Drying Time | h | 4~6 | ||
Front Temperature | ℃ | 240~270 | ||
Middle Temperature | ℃ | 260~280 | ||
Temperature of The Third Section | ℃ | 265~290 | ||
Melting temperature | ℃ | 240~290 | ||
Maximum melting temperature | ℃ | 300 | ||
Mold Temperature | ℃ | 30~90 |