description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| K01 | ||||
| PROPERTY | ||||
| Alloy | ||||
| FEATURES | APPLICATIONS | |||
| High fluidity | Household equipment | |||
| Chemical resistance | Commercial equipment | |||
| Good weather resistance | Large products | |||
| Good processability | Injection molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ASTM D792 | 23℃ | g/cm³ | 1.22 |
| Shrinkage Rate | ASTM D995 | 23℃ | % | 0.6~1.0 |
| Melt index 230°C 5kg | ASTM D1238 | 23 ℃ | g/10min | 28 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ASTM D638 | 50mm/min | Mpa | 55 |
| Elongation | ASTM D638 | 50mm/min | % | 80 |
| Flexural Strength | ASTM D790 | 2.0mm/min | Mpa | 80 |
| Flexural Modulus | ASTM D790 | 2.0mm/min | Mpa | 2100 |
| Cantilever notch impact 23°C 3.2mm | ASTM D256 | 23 ° C A-notch | J/m | 660 |
| Cantilever without notch impact 23°C 3.2mm | ASTM D256 | 23 ° C A-notch | J/m | NB |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ASTM D648 | 0.45MPa | ℃ | 107 |
| H.D.T | ASTM D648 | 1.8MPa | ℃ | 95 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | ASTM D257 | 1E16 | Ω.cm | |
| Surface resistance | ASTM D257 | 1E15 | Ω | |
| Insulation strength | ASTM D149 | 28 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| HWI Full color 1.5mm | UL 746A | 4 | PLC | |
| HWI Full color 3.0mm | UL 746A | 2 | PLC | |
| HAI Full color 1.5mm | UL 746A | 0 | PLC | |
| HAI Full color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full color 1.5mm | UL 746B | 50 | °C | |
| RTI Elec Full color 3.0mm | UL 746B | 50 | °C | |
| RTI Imp Full color 1.5mm | UL 746B | 50 | °C | |
| RTI Imp Full color 3.0mm | UL 746B | 50 | °C | |
| RTI Str Full color 1.5mm | UL 746B | 50 | °C | |
| RTI Str Full color 3.0mm | UL 746B | 50 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 120 | ||
| Drying Time | h | 4~6 | ||
| Front Temperature | ℃ | 220~240 | ||
| Middle Temperature | ℃ | 230~250 | ||
| Temperature of The Third Section | ℃ | 240~260 | ||
| Melting temperature | ℃ | 220~260 | ||
| Maximum melting temperature | ℃ | 280 | ||
| Mold Temperature | ℃ | 60~100 | ||
| Injection speed | Low speed to high speed | |||
Related Products
