PBT FRG6 K0HT
30% glass fiber reinforced
flame retardant
high heat resistance grade
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PBT FRG6 K0HT | ||||
| PROPERTY | ||||
| 30% glass fiber reinforced flame retardant with high heat resistance grade | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.61 |
| Shrinkage Rate Flow | ISO 2577 | 23℃ | % | 0.3 |
| Shrinkage Rate Vertical | ISO 2577 | 23℃ | % | 0.9 |
| Water Absorption Rate 23 ℃ 50RH equilibrium | ISO 62 | 23 ℃ | % | 0.06 |
| Ash Content | ISO 3451 | 23℃ | % | 30 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 120 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength 23°C | ISO 527 | 10mm/min | Mpa | 120 |
| Elongation at Break 23°C | ISO 527 | 10mm/min | % | 2.6 |
| Flexural Strength 23°C | ISO 178 | 2.0mm/min | Mpa | 180 |
| Flexural Modulus 23°C | ISO 178 | 2.0mm/min | Mpa | 9000 |
| Cantilever notch impact 23°C | ISO 180 | 23 ° C A-notch | kJ/m² | 8.5 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 0.45MPa | ℃ | 220 |
| H.D.T | ISO 75 | 1.8MPa | ℃ | 210 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E16 | Ω.cm | |
| Insulation strength 2.0mm in oil | IEC 60243 | 23 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| HWI Full color 3.0mm | UL 746A | 0 | PLC | |
| HAI Full color 3.0mm | UL 746A | 3 | PLC | |
| RTI Elec Full color 3.0mm | UL 746B | 130 | °C | |
| RTI Imp Full color 3.0mm | UL 746B | 125 | °C | |
| RTI Str Full color 3.0mm | UL 746B | 140 | °C | |
| CTI | IEC 60112 | 2 | PLC | |
| Arc Resistance | ASTM D495 | 6 | PLC | |
| HVTR | UL 746A | 3 | PLC | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| Spheric pressure | IEC 60695-10-2 | 200 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 120~140 | ||
| Drying Time | hr | 4~6 | ||
| Front Temperature | ℃ | 220~240 | ||
| Middle Temperature | ℃ | 230~250 | ||
| Temperature of The Third Section | ℃ | 240~260 | ||
| Melting temperature | ℃ | 235~255 | ||
| Maximum melting temperature | ℃ | 275 | ||
| Mold Temperature | ℃ | 40~120 | ||
| Injection speed | Medium to high speed | |||
Related Products
