description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PA66 G3 K01 | ||||
| FEATURES | APPLICATIONS | |||
| Stable size | Automotive Components | |||
| Good appearance | Injection Molding Applications | |||
| High temperature resistance • High strength | Automotive components | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.22 |
| Shrinkage Rate | ISO 2577 | Flow | % | 0.5 |
| Shrinkage Rate | ISO 2577 | Perpendicular | % | 1.2 |
| Water absorption rate | ISO 62 | 23°C 50RH balance | % | 2.2 |
| Ash content | ISO 3451 | % | 15 | |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile strength | ISO 527 | 10mm/min | Mpa | 130 |
| Elongation fracture | ISO 527 | 10mm/min | % | 3.7 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 190 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 5100 |
| Cantilever notch impact | ISO 180 | 23 ° C | KJ/m2 | 8.5 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 0.45MPa | ℃ | 255 |
| H.D.T | ISO 75 | 1.8MPa | ℃ | 235 |
| Electrical Performance | ||||
| Volume resistance | IEC 60093 | 1E15 | Ω.cm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.2mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.2mm | UL94 | HB | ||
| HWI Full color 1.6mm | UL 746A | 5 | PLC | |
| HWI Full color 3.2mm | UL 746A | 4 | PLC | |
| HAI Full color 1.6mm | UL 746A | 0 | PLC | |
| HAI Full color 3.2mm | UL 746A | 0 | PLC | |
| RTI Elec Full l Color 0.8mm | UL 746B | 140 | °C | |
| RTI Elec Full l Color 1.6mm | UL 746B | 140 | °C | |
| RTI Elec Full Color 3.2mm | UL 746B | 140 | °C | |
| RTI Imp Full Color 0.8mm | UL 746B | 105 | °C | |
| RTI Imp Full Color 1.6mm | UL 746B | 105 | °C | |
| RTI Imp Full Color 3.2mm | UL 746B | 125 | °C | |
| RTI Str Full Color 0.8mm | UL 746B | 110 | °C | |
| RTI Str Full Color 1.6mm | UL 746B | 110 | °C | |
| RTI Str Full Color 3.2mm | UL 746B | 130 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 90~110 | ||
| Drying Time | h | 4~6 | ||
| Front Temperature | ℃ | 260～275 | ||
| Middle Temperature | ℃ | 270～280 | ||
| Temperature of The Third Section | ℃ | 280～290 | ||
| Melting temperature | ℃ | 270~290 | ||
| Maximum melting temperature | ℃ | 300 | ||
| Mold Temperature | ℃ | 50～120 | ||
| Injection speed | Medium and high speed | |||
