PA66 G2HT K01
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PA66 G2HT K01 | ||||
| FEATURES | APPLICATIONS | |||
| Stable size | Automotive Components | |||
| Good appearance | Injection Molding Applications | |||
| High temperature resistance • High strength | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.13 |
| Shrinkage Rate | ISO 2577 | 23℃ | % | 1.3~1.5 |
| Water absorption rate | ISO 62 | 23°C 50RH balance | % | 2.5 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 160 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile modulus | ISO 527 | 10mm/min | Mpa | 3200 |
| Tensile strength | ISO 527 | 50mm/min | % | 80 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 110 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2700 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 0.45MPa | ℃ | 220 |
| H.D.T | ISO 75 | 1.8MPa | ℃ | 75 |
| Electrical Performance | ||||
| Volume resistance | IEC 60093 | 1.51E+3 | Ω.cm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.75mm | UL94 | V-2 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-2 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 0.75mm | UL94 | V-2 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-2 | ||
| HWI Full color 0.75mm | UL 746A | 4 | PLC | |
| HWI Full color 3.0mm | UL 746A | 4 | PLC | |
| HAI Full color 0.75mm | UL 746A | 0 | PLC | |
| HAI Full color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full l Color 0.75mm | UL 746B | 65 | °C | |
| RTI Elec Full Color 3.0mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 0.75mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 65 | °C | |
| RTI Str Full Color 0.75mm | UL 746B | 65 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 65 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Insulation strength | ASTM D149 | 11 | KV/mm | |
| GWFI 1.5mm | IEC 60695-2-12 | 960 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| GWIT 1.5mm | IEC 60695-2-13 | 700 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 700 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 100~130 | ||
| Drying Time | h | 4~6 | ||
| Front Temperature | ℃ | 270～285 | ||
| Middle Temperature | ℃ | 280～290 | ||
| Temperature of The Third Section | ℃ | 290～300 | ||
| Melting temperature | ℃ | 270~290 | ||
| Maximum melting temperature | ℃ | 320 | ||
| Mold Temperature | ℃ | 40～100 | ||
| Injection speed | Medium and high speed | |||
