description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| AS G4 K01 | ||||
| PROPERTY | ||||
| 20% glass fiber reinforced | ||||
| FEATURES | APPLICATIONS | |||
| Dimensional stability | Axial fans | |||
| Low shrinkage | Centrifugal fans | |||
| Good mechanical properties | Cross flow fans | |||
| Low warpage | Injection molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity 23°C | ISO 1183 | 23℃ | g/cm³ | 1.22 |
| Shrinkage Rate Flow 23°C | ISO 2577 | 23℃ | % | 0.1~0.3 |
| Melt index 230°C 5kg | ISO 1133 | 23℃ | % | 15 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength 10mm/min | ISO 527 | 10mm/min | Mpa | 115 |
| Elongation at Break 10mm/min | ISO 527 | 10mm/min | % | 2 |
| Flexural Strength2.0mm/min | ISO 178 | 2.0mm/min | Mpa | 155 |
| Flexural Modulus 2.0mm/min | ISO 178 | 2.0mm/min | Mpa | 7100 |
| Cantilever notch impact 23°C | ISO 180 | 23 ° C A-notch | kJ/m² | 6.5 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 0.45MPa | ℃ | 102 |
| Vica softening temperature | ISO 306 | 1.8MPa | ℃ | 112 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E16 | Ω.cm | |
| Insulation strength 2.0mm in oil | IEC 60243 | 23 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color black 1.6mm | UL94 | HB | ||
| Fire Rating Full Color black 3.2mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color black 1.6mm | UL94 | HB | ||
| Fire Rating Full Color black 3.2mm | UL94 | HB | ||
| RTI Elec Full color black 1.6mm | UL 746B | 50 | °C | |
| RTI Elec Full color black 3.2mm | UL 746B | 50 | °C | |
| RTI Imp Full color black 1.6mm | UL 746B | 50 | °C | |
| RTI Imp Full color black 3.2mm | UL 746B | 50 | °C | |
| RTI Str Full color black 1.6mm | UL 746B | 50 | °C | |
| RTI Str Full color black 3.2mm | UL 746B | 50 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80~90 | ||
| Drying Time | hr | 2~4 | ||
| Front Temperature | ℃ | 190~215 | ||
| Middle Temperature | ℃ | 210~250 | ||
| Temperature of The Third Section | ℃ | 220~260 | ||
| Melting temperature | ℃ | 210~250 | ||
| Maximum melting temperature | ℃ | 260 | ||
| Mold Temperature | ℃ | 40~90 | ||
| Injection speed | Low to medium speed | |||
| Back pressure | KPa | 0.0~1000 | ||
Related Products
