AS G2 K01
10% glass fiber reinforced
Material Technical Datasheet | ||||
AS G2 K01 | ||||
PROPERTY | ||||
10% glass fiber reinforced | ||||
FEATURES | APPLICATIONS | |||
Dimensional stability | Axial fans | |||
Low shrinkage | Centrifugal fans | |||
Good mechanical properties | Cross flow fans | |||
Low warpage | Injection molding applications | |||
Properties | Test Standard | Test Condition | Units | Typical Values |
Physical Properties | ||||
Specific Gravity 23°C | ISO 1183 | 23℃ | g/cm³ | 1.16 |
Shrinkage Rate Flow 23°C | ISO 2577 | 23℃ | % | 0.2~0.4 |
Melt index 230°C 5kg | ISO 1133 | 23℃ | % | 20 |
Mechanical Properties | ||||
Mechanical Properties | Test Standard | Test Condition | Units | Data |
Tensile Strength 10mm/min | ISO 527 | 10mm/min | Mpa | 90 |
Elongation at Break 10mm/min | ISO 527 | 10mm/min | % | 3 |
Flexural Strength2.0mm/min | ISO 178 | 2.0mm/min | Mpa | 130 |
Flexural Modulus 2.0mm/min | ISO 178 | 2.0mm/min | Mpa | 5500 |
Cantilever notch impact 23°C | ISO 180 | 23 ° C A-notch | kJ/m² | 4.5 |
Thermal Properties | ||||
Thermal Properties | Test Standard | Test Condition | Units | Data |
Thermal deformation temperature | ISO 75 | 0.45MPa | ℃ | 100 |
Vica softening temperature | ISO 306 | 1.8MPa | ℃ | 110 |
Electrical Performance | ||||
Electrical Performance | Test Standard | Data | Units | |
Volume resistance | IEC 60093 | 1E16 | Ω.cm | |
Insulation strength 2.0mm in oil | IEC 60243 | 23 | KV/mm | |
Flame Retardancy | ||||
Flame Retardancy | Test Standard | Data | ||
Fire Rating Full Color black 1.6mm | UL94 | HB | ||
Fire Rating Full Color black 3.2mm | UL94 | HB | ||
UL | ||||
Flame Retardancy | Test Standard | Data | Units | |
Fire Rating Full Color black 1.6mm | UL94 | HB | ||
Fire Rating Full Color black 3.2mm | UL94 | HB | ||
RTI Elec Full color black 1.6mm | UL 746B | 50 | °C | |
RTI Elec Full color black 3.2mm | UL 746B | 50 | °C | |
RTI Imp Full color black 1.6mm | UL 746B | 50 | °C | |
RTI Imp Full color black 3.2mm | UL 746B | 50 | °C | |
RTI Str Full color black 1.6mm | UL 746B | 50 | °C | |
RTI Str Full color black 3.2mm | UL 746B | 50 | °C | |
Injection Molding | ||||
Injection Molding | Units | Data | ||
Drying Temperature | ℃ | 80~90 | ||
Drying Time | hr | 2~4 | ||
Front Temperature | ℃ | 190~215 | ||
Middle Temperature | ℃ | 210~250 | ||
Temperature of The Third Section | ℃ | 220~260 | ||
Melting temperature | ℃ | 210~250 | ||
Maximum melting temperature | ℃ | 260 | ||
Mold Temperature | ℃ | 40~90 | ||
Injection speed | Low to medium speed | |||
Back pressure | KPa | 0.0~1000 |