HIPS FR K02
10% glass fiber reinforced
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| HIPS FR K02 | ||||
| PROPERTY | ||||
| 10% glass fiber reinforced | ||||
| FEATURES | APPLICATIONS | |||
| High gloss | Electronics cabinet | |||
| High impact | Gas-assisted Injection Molding (GIT) applications | |||
| Injection molding applications | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity 23°C | ISO 1183 | 23℃ | g/cm³ | 1.15 |
| Shrinkage Rate Flow 23°C | ISO 2577 | 23℃ | % | 0.4~0.6 |
| Melt index 230°C 5kg | ISO 1133 | 23℃ | % | 8 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 101 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength 50mm/min | ISO 527 | 50mm/min | Mpa | 23 |
| Elongation at Break 50mm/min | ISO 527 | 50mm/min | % | 30 |
| Flexural Strength 2.0mm/min | ISO 178 | 2.0mm/min | Mpa | 35 |
| Flexural Modulus 2.0mm/min | ISO 178 | 2.0mm/min | Mpa | 2000 |
| Cantilever notch impact 23°C A-notch | ISO 180 | 23 ° C A-notch | kJ/m² | 8.0 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T 0.45MPa 4.0mm | ISO 75 | 0.45MPa | ℃ | 81 |
| H.D.T 1.8MPa 4.0mm | ISO 75 | 1.8MPa | ℃ | 72 |
| Thermal deformation temperature | ISO 306 | 0.45MPa | ℃ | 94 |
| Vica softening temperature | ISO 306 | 1.8MPa | ℃ | 85 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E16 | Ω.cm | |
| Insulation strength | IEC 60243 | 22 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | V-0 | ||
| Fire Rating Full Color 2.5mm | UL94 | V-0 5VA | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 5VA | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | V-0 | ||
| Fire Rating Full Color 2.5mm | UL94 | V-0 5VA | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 5VA | ||
| HWI Full color 1.6mm | UL 746A | 3 | PLC | |
| HWI Full color 2.5mm | UL 746A | 3 | PLC | |
| HWI Full color 3.0mm | UL 746A | 3 | PLC | |
| HAI Full color 1.6mm | UL 746A | 0 | PLC | |
| HAI Full color 2.5mm | UL 746A | 0 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full color 0.8mm | UL 746B | 50 | °C | |
| RTI Elec Full color 1.6mm | UL 746B | 50 | °C | |
| RTI Elec Full color 2.5mm | UL 746B | 50 | °C | |
| RTI Elec Full color 3.0mm | UL 746B | 50 | °C | |
| RTI Imp Full color 0.8mm | UL 746B | 50 | °C | |
| RTI Imp Full color 1.6mm | UL 746B | 50 | °C | |
| RTI Imp Full color 2.5mm | UL 746B | 50 | °C | |
| RTI Imp Full color 3.0mm | UL 746B | 50 | °C | |
| RTI Str Full color 0.8mm | UL 746B | 50 | °C | |
| RTI Str Full color 1.6mm | UL 746B | 50 | °C | |
| RTI Str Full color 2.5mm | UL 746B | 50 | °C | |
| RTI Str Full color 3.0mm | UL 746B | 50 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| GWFI 1.6mm | IEC 60695-2-12 | 960 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| GWIT 1.5mm | IEC 60695-2-13 | 675 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 700 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 70 | ||
| Drying Time | hr | 2~4 | ||
| Front Temperature | ℃ | 182~205 | ||
| Middle Temperature | ℃ | 205~230 | ||
| Temperature of The Third Section | ℃ | 215~240 | ||
| Melting temperature | ℃ | 220~245 | ||
| Maximum melting temperature | ℃ | 250 | ||
| Mold Temperature | ℃ | 30~60 | ||
| Injection speed | Low to medium speed | |||
| Back pressure | KPa | 5~15 | ||
Related Products
