PA6 G50 K01
50% glass fiber reinforced
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PA6 G50 K01 | ||||
| Material Properties | ||||
| 50% glass fiber reinforced | ||||
| FEATURES | APPLICATIONS | |||
| Good appearance | Home appliance applications | |||
| Dimensional stability | Electric tool handle | |||
| Good mechanical performance | Sports Goods Application |
|||
| Injection molding applications | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23°C | g/cm³ | 1.55 |
| Shrinkage Rate | ISO 2577 | flow | % | 0.2 |
| Shrinkage Rate | ISO 2577 | perpendicular | % | 0.6 |
| Water absorption rate | ISO 62 | 23 ° C 50RH balance | % | 1.4 |
| Ash content | ISO 3451 | % | 50 | |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 23 ° C 10mm/min | Mpa | 205 |
| Elongation at Break | ISO 527 | 23 ° C 10mm/min | % | 2.2 |
| Flexural Strength | ISO 178 | 23 ° C 2.0mm/min | Mpa | 300 |
| Flexural Modulus | ISO 178 | 23 ° C 2.0mm/min | Mpa | 12500 |
| Cantilever beam notch impact | ISO 180 | 23 ° C | kJ/m2 | 20 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 0.45MPa | ℃ | 220 |
| Thermal deformation temperature | ISO 75 | 1.8MPa | ℃ | 215 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1.51E+3 | Ω.cm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.75mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 0.75mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| HWI Full Color 0.75mm | UL 746A | 4 | PLC | |
| HWI Full Color 1.6mm | UL 746A | 2 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 0 | PLC | |
| HAI Full Color 0.75mm | UL 746A | 0 | PLC | |
| HAI Full Color 1.6mm | UL 746A | 0 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full Color 0.75mm | UL 746B | 65 | PLC | |
| RTI Elec Full Color 1.6mm | UL 746B | 65 | °C | |
| RTI Elec Full Color 3.0mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 0.75mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 1.6mm | UL 746B | 65 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 65 | °C | |
| RTI Str Full Color 0.75mm | UL 746B | 65 | °C | |
| RTI Str Full Color 1.6mm | UL 746B | 65 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 65 | °C | |
| Insulation strength | ASTM D149 | 11 | KV/mm | |
| Arc resistance | ASTM D495 | 5 | PLC | |
| GWFI 0.75mm | IEC 60695-2-12 | 700 | °C | |
| GWFI 1.6mm | IEC 60695-2-12 | 700 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 700 | °C | |
| GWIT 0.75mm | IEC 60695-2-13 | 725 | °C | |
| GWIT 1.6mm | IEC 60695-2-13 | 725 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 725 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 90～110 | ||
| Drying Time | h | 4～6 | ||
| Front Temperature | ℃ | 230～250 | ||
| Middle Temperature | ℃ | 250～270 | ||
| Temperature of The Third Section | ℃ | 260～280 | ||
| Melting temperature | ℃ | 255~280 | ||
| Maximum melting temperature | ℃ | 300 | ||
| Mold Temperature | ℃ | 50～120 | ||
| Injection speed | High speed | |||
Related Products
