PA6 FRG6 K2NP
30% glass fiber reinforced
halogen-free flame retardant
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Information
| Material Technical Datasheet | ||||
| PA6 FRG6 K2NP | ||||
| Material Properties | ||||
| 30% glass fiber reinforced, halogen-free flame retardant | ||||
| FEATURES | APPLICATIONS | |||
| No frost formation | Electronic and Electrical Applications | |||
| Good mechanical performance | Injection Molding Applications | |||
| Low smoke density | ||||
| Physical Properties | ||||
| Properties | Test Standard | Test Condition | Units | Data |
| Specific Gravity | ISO 1183 | 23°C | g/cm³ | 1.43 |
| Shrinkage Rate | ISO 294 | Flow | % | 0.5 |
| Shrinkage Rate | ISO 294 | Perpendicular | % | 0.7 |
| Water absorption rate | ISO 62 | Balance | % | 1.6 |
| Ash content | ISO 3451 | % | 30 | |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ASTM D785 | 120 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 80 |
| Elongation at Break | ISO 527 | 10mm/min | % | 3 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 150 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 5500 |
| Cantilever beam notch impact | ISO 180 | 23°C | J/m2 | 5 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 0.45MPa | ℃ | 210 |
| Thermal deformation temperature | ISO 75 | 1.8MPa | ℃ | 175 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E15 | Ω.cm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.75mm | UL94 | V-2 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-2 | ||
| Glowing wire relative temperature | IEC 60695 | 960℃ | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 0.75mm | UL94 | V-2 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-2 | ||
| HWI Full Color 0.75mm | UL 746A | 0 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 0 | PLC | |
| HAI Full Color 0.75mm | UL 746A | 0 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full Color 0.75mm | UL 746B | 140 | °C | |
| RTI Elec Full Color 3.0mm | UL 746B | 140 | °C | |
| RTI Imp Full Color 0.75mm | UL 746B | 120 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 120 | °C | |
| RTI Str Full Color 0.75mm | UL 746B | 140 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 140 | °C | |
| Insulation strength | ASTM D149 | 9 | KV/mm | |
| GWFI 0.75mm | IEC 60695-2-12 | 960 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| GWIT 0.75mm | IEC 60695-2-13 | 850 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 875 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 90～110 | ||
| Drying Time | h | 4～6 | ||
| Front Temperature | ℃ | 220～235 | ||
| Middle Temperature | ℃ | 230～250 | ||
| Temperature of The Third Section | ℃ | 240～260 | ||
| Melting temperature | ℃ | 240~260 | ||
| Maximum melting temperature | ℃ | 280 | ||
| Mold Temperature | ℃ | 60～90 | ||
| Injection speed | High speed | |||
Related Products
